Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens - Manual (Page 90)

66 Basic Settings
To enable the electronic shutter and
eliminate the noise and vibration caused
by operation of the mechanical shutter,
select
On for Silent photography in the
photo shooting menu.
An icon is displayed while silent
photography is in effect. When the
shutter is released, the display will
briefly go dark to signal that a photo has
be taken.
Enabling silent photography changes the frame advance rates
for continuous release modes (
0 84) and disables some
features, including the flash, beep speaker, long exposure noise
reduction, and the electronic front-curtain shutter.
Silent Photography
D Silent Photography
Although the noise of the mechanical shutter is muted, other sounds
may still be audible, for example during autofocus or aperture
adjustment or if the
G or K button is pressed when an option other
than Off is selected for Vibration reduction . During silent
photography, flicker, banding, or distortion may be visible in the
display and in the final picture under fluorescent, mercury vapor, or
sodium lamps or with subjects that are in motion, particularly if the
camera is panned horizontally or an object moves horizontally at high
speed through the frame. Jagged edges, color fringing,
moiré , and
bright spots may also appear. Bright regions or bands may appear in
some areas of the frame with flashing signs and other intermittent
light sources or if the subject is briefly illuminated by a strobe or other
bright, momentary light source.