Nikon NIKKOR Z 70-200mm f/2.8 VR S Lens - Manual (Page 209)

185 Technical Notes
Remote cords MC-DC2 Remote Cord (length 1 m/3 ft 4 in.): When connected
to the camera accessory terminal, the MC-DC2 can be
used to release the shutter remotely.
GPS units GP-1/GP-1A GPS Unit : When connected to the camera
accessory terminal, existing GP-1/GP-1A units can be
used to record the current latitude, longitude, altitude,
and UTC (Universal Coordinated Time) with pictures
taken with the camera. Note that production of GP-1/
GP-1A units has ended.
USB cables • UC-E24 USB cable : A USB cable with a type C connector for
connection to the camera.
• UC-E25 USB cable : A USB cable with two type C connectors.
HDMI cables HC-E1 HDMI Cable : An HDMI cable with a type C connector
for connection to the camera and a type A connector for
connection to HDMI devices.
Accessory shoe
covers BS-1 Accessory Shoe Cover : A cover protecting the accessory
shoe when no flash unit is attached.
Body caps BF-N1 Body Cap : The body cap prevents dust entering the
camera when a lens is not in place.
Wireless
transmitters WT-7 Wireless Transmitter : Use the WT-7 to upload pictures
over a wireless network, to control the camera from a
computer running Camera Control Pro 2 (available
separately), or to take and browse pictures remotely from
a computer or smart device.
Note : A wireless network and some basic network knowledge is required
when using a wireless transmitter. Be sure to update the wireless transmitter
software to the latest version.