Profoto A2 Monolight - Manual (Page 22)

A2
22
www.profoto.com
Warning sounds
The warning sounds setting is used to enable/disable the sound for the
wrong exposure alarm. For more information, see the section
Wrong
exposure alarm.
Display brightness
The display brightness setting is used to set the brightness of the
display [5].
Standby
To save battery, the A2 can be set to go into standby mode after a
selectable period of inactivity.
Auto off
To save battery, the A2 can be set to automatically switch off after a
selectable period of inactivity.
About
This option displays information such as serial number and firmware
version.
Regulatory info
This option displays regulatory information.
Factory reset
This option opens a dialog where you can choose to reset all settings
to the factory default settings.