Profoto A2 Monolight - Manual (Page 21)

A2 A2
21
www.profoto.com
Continuous light
The continuous light setting defines how the continuous light intensity
will be adjusted in relation to the flash power setting.
• MAX: The light intensity will be maximal, regardless of the flash
power setting.
• PROP: The light intensity will be proportional to the flash power
setting. This setting is recommended if the continuous light is used
as modeling light.
Advanced settings
The Advanced option opens the advanced settings menu.
Ready signal
The ready signal setting is used to select how the A2 will indicate that it
is fully recharged after flashing and ready to flash again.
• SOUND: The A2 beeps when it is ready to flash.
• DIM: The continuous light turns off after flashing and turns on when
the A2 is ready to flash.
• SOUND & DIM: The continuous light turns off after flashing. The
continuous light turns on and the A2 beeps when it is ready to flash.
• OFF: Ready signaling is deactivated.
NOTE
The test button [9] always turns off after flashing and turns on again when the A2 is
ready to flash.
Control sounds
The control sounds setting is used to enable/disable the tactile sounds
for the dial and buttons.