Geekoto GT200 Monolight Full Kit - Manual (Page 11)

When using the GT-200 and GEEKOTO C1(Commender) series trigger
together
， the C1 can control the flash function such as:
• Flash Mode: TTL/M/Multi
• Sync Mode: First-curtain sync, second-curtain sync, and High-speed sync
• Control the power level •Modeling Lamp ON/OFF •Beeper ON/OFF
- 17 - - 18 -
Wireless Flash Shooting
Positioning and operation Range (Example of wireless flash shooting)
• Auto-flash shooting with one slave unit
• Use the supplied stand to position the slave unit.
• Before shooting, perform a test flash and test shot.
• The transmission distance might be shorter depending on the conditions such as
the positioning of slave units, the surrounding environment and weather conditions.
• With a lot of wireless signal interference, if there’s a miss flash please change the
wireless communication channel.
Transmission distance is
about 50 meters.
Wireless Multiple Shooting
You can divide the slave units into two or three groups and perform TTL
autoflash while changing the flash ratio (factor). In addition, you can set
and shoot with a different flash mode for each firing group, for up to 4
groups.
• Auto Shooting with Two Slave Groups • Auto Shooting with Three Slave Groups
A
B
A
B
C
Wireless Flash Shooting