Using wimaxit’s buttons, Power button, Power on – Wimaxit M1331CV2 13.3" HDR Portable Monitor User Manual
Page 5: Press power button after power off, Auto power on when power is connected, Power off, Hold power button for 3 seconds, Return/exist, While on menu status, short press for return, Input
Customer support:[email protected]
Website:www.wimaxit.com
5
Using Wimaxit’s Buttons
Power Button
Power On:
Press power button after power off.
Auto Power on when power is connected.
Power Off:
Hold power button for 3 seconds.
Return/Exist:
While on menu status, short press for return.
Input:
Short press power button to select input source.
Show Settings Menu:
Press
wheel button.
While on menu status, short press to confirm and
save your setting.
Volume Setting Shortcut:
Toggle wheel button Up.
Push up to increase volume
push down to decrease volume
Brightness(Backlight) Setting Shortcut:
Toggle wheel button Down.
Push up to increase brightness
Push down to decrease brightness
Note:
Make sure to save your settings via the Wheel Button before closing the menu.