Wimaxit M1331CV2 13.3" HDR Portable Monitor User Manual
Wimaxit, Portable monitor
Customer support:[email protected]
Website:www.wimaxit.com
1
WIMAXIT
PORTABLE MONITOR
M1331C V2 USER MANUAL
Table of contents
Document Outline
- Contents in the box
- Note: If there is anything missing or damaged in t
- Interface instructions
- LED indicator light
- Blue Color: ON/ Input source detected
- Red Color: No valid source/ Standby status
- Dark: OFF
- Using Wimaxit’s Buttons
- Power Button
- Show Settings Menu:
- Press wheel button.
- While on menu status, short press to confirm and s
- Volume Setting Shortcut:
- Toggle wheel button Up.
- Push up to increase volume
- push down to decrease volume
- Brightness(Backlight) Setting Shortcut:
- Toggle wheel button Down.
- Push up to increase brightness
- Push down to decrease brightness
- Note: Make sure to save your settings via the Whee
- Menu Settings
- PICTURE
- Brightness
- Select brightness level between 1(lowest) to 10(hi
- Contrast
- Select contrast level between 0(lowest) to 10(high
- ECO
- Select View Mode Settings (Standard, Game, Movie,
- DCR
- Dynamic Contrast Ratio (ON or OFF). Selecting ON w
- Sharpness
- Select sharpness level between 0(lowest) to 4(high
- COLOR
- Color Temp.
- 9300k(coolest), 6500k(cool), SRGB (standard Red Gr
- Hue
- Select hue levels 0 to 10
- Saturation
- Select Saturation levels 0 to 10
- Low Blue Light
- Levels 0 to 10. Low Blue Light Technology reduces
- FreeSync
- On/off
- PCM
- Select Color Gamut from the following (SRGB, ADOBE
- AUDIO
- Volume
- Select loudness levels 0 to 10
- Mute
- Select ON (muted) or OFF (unmuted)
- OTHER
- Language
- Select language (English, Simplified Chinese, Trad
- HDR
- Select from the following (OFF, AUTO,2084)
- Reset
- Reset all settings to factory default
- INPUT
- Auto Select
- Recommended
- Type-C1
- Type-C2
- HDMI
- Ports and Connections
- Specifications
- Troubleshooting (FAQ)
- WIMAXIT MONITOR
- www.wimaxit.com
- [email protected]