Wimaxit M1331CV2 13.3" HDR Portable Monitor User Manual
Page 12
Customer support:[email protected]
Website:www.wimaxit.com
12
4. Wimaxit display isn
’
t working when a USB-C cable is connected
Make sure that your device is on the list of supported devices and that the USB-C port
on your device is a full-featured USB-C(USB-C 3.1 Gen2(10 Gbps)) port. If the USB-C port
on your device is only capable of charging, then it cannot support video transfer to
Wimaxit display.
5. The speakers aren
’
t working
Check to see if the display is set to
“
Silent
”
and make sure the volume is turned up. Go to
Volume Settings to set up Wimaxit
’
s audio.
6. The Power LED Light is green and there is no screen image
Check if the monitor and the computer are on.
Make sure your video input (USB-C or mini HDMI) are properly connected.
Inspect the signal cable and make sure the pins are not bent or damaged.
Connect the computer to another monitor to ensure the computer and output port
is working properly.
7. Screen image is too light or dark
Adjust the Brightness settings via the Roll key Button, short press the
“
+
”
,
“
-
”
Button.
8. Screen image bounces or a wave pattern is present in the image
Make sure the USB-C cable is properly connected.
Move away from electrical devices that may cause interference.
9. Screen image has color defects (white does not look white)