Electrolux 12830 - Manual (Page 12)

12
Description of the appliance
Position 40°C Easy iron.
In this position the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier.
Position COLD = cold wash
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on
and an acoustic signal can be heard. When they are pressed again, the
pilot lights go out.
When an incorrect option is selected, the button light flashes for 2 sec-
onds, an acoustic signal sounds and in the display the Err message
appears.
PREWASH
The machine performs a prewash cycle. The prewash cycle ends with a
short spin in programmes for Cotton and Easy cares, and with empty-
ing of the water without spinning for Delicates.
This option is not available with the wool programme and cannot be
used with STAIN option.
For use when washing heavily soiled laundry.
STAIN
To treat heavily soiled or stained laundry with stain remover (extended
main wash with time optimised stain action phase, not selectable for
wool or programmes with temperatures lower than 40°C).
This function cannot be used with PREWASH.
SENSITIVE
By depressing this button the washing intensity will be reduced. The
machine adds one rinse in the programmes for COTTONS and EASY
CARES. This option cannot be used with EASY IRON.
132984010.qxd 24/06/2005 16:30 Pagina 12