Extron electronic VLM 2000 - Manual (Page 42)

Special Application, cont’d
VoiceLift Microphone • Special Application 4-4
PRELIMINAR
Y
4. Using Global Configurator on your computer, configure the MLC’s Digital
I/O port for digital input with pull-up.
Global Configurator screen for configuring the MLC’s Digital I/O port
5. Use Global Configurator to configure a monitoring device to send an e-mail
when the MLC’s Digital I/O port closes.
(Refer to the Global Configurator help file for procedures to configure the
MLC’s Digital I/O port and the monitor using Global Configurator.)
6. Test the instant alert notification as follows:
a.
Make sure that the MLC 104 IP Plus is connected to the network.
b. Make sure that channel A or B has been selected for the microphone.
c. Press and hold both sections of the Volume button on the microphone
simultaneously for 2 seconds. The LED in the receiver dome blinks
alternating amber and green.
Press and hold both
sections of the
Volume button
simultaneously.
d. Check for the arrival of the e-mail notification.