Preliminar y – Extron electronic VLM 2000 User Manual
Page 29
2-19
VoiceLift
™
Microphone • Operation and Features
PRELIMINAR
Y
OUT
IN
OUT
IN
OUT
IN
OUT
IN
VLR 102 SR
Secondary Receivers
(optional)
VLR 102
Receiver
IN
300’ (91.4m)
Out
Out
In
In
Out
Out
In
Out
In
Connecting a VLR 102 Receiver to multiple secondary receivers
The table below shows the pin assignments for the secondary receiver's In and
Out connectors.
Pin
568A Wire Color
Signal
1
White - green
Ch A Mic +
2
Green
Ch A Mic –
3
White-orange
Ch B Mic +
4
Blue
Data
5
White-blue
+ 12 V
6
Orange
Ch B Mic –
7
White-brown
Data
8
Brown
Ground
c
Dome LED — Located in the center of the secondary receiver dome, this LED
lights green or amber, following the status of the primary receiver.
3
For instructions on removing and replacing the secondary receiver dome, see
“Removing and replacing the receiver dome”, earlier in this chapter.
12345678
RJ-45 Connector
Insert Twisted
Pair Wires
Pins: