HP Z32k G3 31.5" 4K HDR Monitor - Manual (Page 18)

3. Connect one end of the USB Type-B cable to a USB Type-B port on the monitor and the other end to a
USB Type-A port on the source device.
4. Connect one end of a network cable to the network jack on the monitor and the other end to a network
wall jack or router.
NOTE: To enable the network function, be sure that the Thunderbolt port is connected.
5. Connect one end of the power cord to a grounded AC outlet and the other end to the power connector on
the monitor.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one can
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
Connecting the cables 13