beautypg.com

HP Z32k G3 31.5" 4K HDR Monitor User Manual

Page 15

background image

1.

Remove the two screws from the VESA holes located on the rear of the monitor head (1), and then

remove the screw fastener (2).

2.

Align the VESA adapter with the screw holes located on the rear of the monitor head (1), and then install

the two screws to secure the adapter (2).

NOTE:

The adapter attaches only after you lower the stand mount to the correct position.

3.

To attach the monitor head to a swing arm or other mounting device, insert four mounting screws

through the holes on the mounting device and into the VESA screw holes on the back of the monitor

head.

IMPORTANT:

If these instructions do not apply to your device, then follow the mounting device

manufacturer’s instructions when mounting the monitor to a wall or swing arm.

10

Chapter 1  Getting started