Chapter 3 setting monitor, 1. enabling / disabling ddc/ci communication, 2. locking operation buttons – Eizo Flexscan S2133 21.3" 4:3 IPS Monitor User Manual
Page 25: 1. enabling / disabling ddc/ci, Communication
25
Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Enabling / Disabling DDC/CI communication
This function allows you to enable / disable the DDC/CI communication (see
“Chapter 7 Glossary” (page 42)
).
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “DDC/CI” in the “Monitor Settings” menu, and press
.
The “DDC/CI” menu appears.
3. Select “On” or “Off” with
or
.
4. Press
to exit.
Note
• The DisplayPort input of this monitor does not support DDC/CI communication.
3-2. Locking Operation Buttons
This function allows you to lock the settings to prevent them being changed.
Procedure
1. Press
to turn off the monitor.
2. Hold down
while pressing
to turn on the monitor.
The Lock / Unlock setting is toggled by performing the operation in step 2.
Note
• The following operations are available even if the buttons are locked:
- Turning on or off the monitor with the Power button