Eizo Flexscan S2133 21.3" 4:3 IPS Monitor - Manual (Page 18)

18
Chapter2AdjustingScreens
●
To adjust hue
This function allows you to adjust hue.
Adjustable range
-50 to 50
Procedure
1. Choose “Color” in the Setting menu, and press .
2. Choose “Advanced Settings” in the “Color” menu, and press .
3. Choose “Hue” in the “Advanced Settings” menu, and press .
The “Hue” menu appears.
4. Use or for adjustment.
5. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.
●
To set overdrive intensity
This function allows you to set overdrive intensity based on the use of the monitor. You can reduce Image lags
by setting it to “Enhanced” when displaying animated images.
Adjustable range
Enhanced, Standard, Off
Procedure
1. Choose “Color” in the Setting menu, and press .
2. Choose “Advanced Settings” in the “Color” menu, and press .
3. Choose “Overdrive” in the “Advanced Settings” menu, and press .
The “Overdrive” menu appears.
4. Use or for adjustment.
5. Press to exit.
Note
• The setting of the overdrive function can be changed in any of the following cases. The function is turned “Off” in all
other cases.
- When the display resolution is 1600 x 1200
- When “Full Screen” or “Enlarged” is selected for “Screen Size” and the vertical scan frequency of the input signal is
60 Hz (except when the resolution is 640 x 480)