Eizo ColorEdge CS2740 26.9" 16:9 Wide Gamut 4K IPS Monitor User Manual
Page 25
25
Chapter 4
Advanced Adjustments/Settings
Function
Settings
Description
YUV Color Matrix
Auto
BT.601
BT.709
BT.2020
Select the YUV format of the input signal. Use this setting for
gradation collapse or other occurrences where the screen
is displayed incorrectly because of a problem with the input
signal.
Input Range
Auto
Full
Limited
(109% white)
Limited
Depending on the external device, the black and white levels
in the video signal output to the monitor may be restricted. If
the signal is displayed on the monitor in its restricted form,
the blacks will be faint, the whites dull, and contrast will
be reduced. The brightness range of such signals can be
extended to match the actual contrast ratio of the monitor.
•
"Auto"
The monitor automatically recognizes the brightness range of
input signals and displays images appropriately.
•
"Full"
The input signal brightness range is not extended.
•
"Limited (109% white)"
The brightness range of the input signal is extended from
16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
•
"Limited"
The brightness range of the input signal is extended from
16 - 235 (10 bits: 64 - 940) to 0 - 255 (10 bits: 0 - 1023) for
display.
HDMI
Settings
Noise
Reduction
On
Off
The small noises that occur in dark areas of an image are
reduced. Use this function to reduce noise and roughness in
images.
Note
•
This can only be set when there is HDMI input.
•
If signals of the following resolutions are input, the function
does not work even if set to "On".
1600 x 1200 / 1920 x 1200 / 2048 x 1080 / 2048 x 1152 /
2560 x 1080 / 2560 x 1440 / 2560 x 1600 / 3840 x 2160
For the supported resolutions for HDMI, see
.
•
Using the Noise Reduction function may lead to deterioration
of fine images.
Signal Information
-
You can check the information for the input signal.
The following information is displayed:
1. Resolution / Vertical scan frequency
2. Input range
3. Color format / Color depth
4. Colorimetry
1
2
3
4
Note
•
Some information may not be displayed depending on the
input signal.