Dell UltraSharp 38" 1600p Curved Monitor - Manual (Page 60)

60
│
Operating the monitor
Auto Select for
USB-C
Allows you to set this function to:
• Prompt for Multiple Inputs : Always displays the
“ Switch to USB-C Video Input ” message for you
to choose whether to switch or not.
• Yes : Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No : Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: The option is available only when Auto
Select is on.
Rename Inputs Allows you to specify a preset input name for the
selected input source. The preset options are
PC ,
PC 1 , PC 2 , Laptop , Laptop 1 , and Laptop 2 . The
default setting is Off .
NOTE: When you perform a rename for the USB-C
input, the wattage value remains after the specified
option, e.g.,
PC 1 90W .
NOTE: It is not applicable for the input names shown
in the warning messages and Display Info .
Reset Input
Source
Resets your monitor input settings to the factory
settings.