Connecting your monitor, Connecting the displayport and usb cable – Dell P2723D 27" 1440p Monitor User Manual

Page 32

│

Setting up the monitor

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the

Safety instructions

NOTE: Dell monitors are designed to work optimally with Dell

supplied inbox cables. Dell does not guarantee the video quality and
performance if non-Dell cables are used.

NOTE: Route the cables through the cable-management slot before

connecting them.

NOTE: Do not connect all cables to the computer at the same time.

NOTE: The images are for the purpose of illustration only. The

appearance of the computer may vary.

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.
2. Connect the DisplayPort or HDMI cable from your monitor to the computer.
3. Connect the USB upstream cable (shipped with your monitor) to an appropriate

USB 3.2 Gen1 port on your computer. (See

Bottom view

for details.)

4. Connect the USB peripherals to the SuperSpeed USB 5 Gbps (USB 3.2 Gen1)

on the monitor.

Connecting the DisplayPort and USB cable

USB