Dell P2723D 27" 1440p Monitor - Manual (Page 12)

12 │ About your monitor
Bottom view
1 2 3 4 5 6 7 7
Bottom view without monitor stand
Label Description Use
1 Security lock slot
(based on Kensington
Security Slot)
Secure your monitor using a security lock
(purchased separately) to prevent unauthorized
movement of your monitor.
2 Power connector Connect the power cable (shipped with your
monitor).
3 Stand lock To lock the stand to the monitor using a M3 x 6
mm screw (screw not included).
4 HDMI port Connect to your computer using a HDMI cable
(purchased separately).
5 DisplayPort Connect to your computer using a DisplayPort
cable (shipped with your monitor).
6 USB 3.2 Gen1
upstream port Connect the USB cable (shipped with your
monitor) from this port to your computer to
enable the USB ports on your monitor.
7 SuperSpeed USB 5
Gbps (USB 3.2 Gen1)
Type-A downstream
port (4) Connect your USB devices. *
NOTE: To use these ports, you must
connect the USB upstream cable
(shipped with your monitor) between the
monitor and the computer.
*To avoid signal interference, when a wireless USB device has been connected
to a USB downstream port, it is NOT recommended to connect any other USB
devices to the adjacent port(s).