Dell P2418HZM 23.8" 16:9 IPS Monitor - Manual (Page 18)

18
| About your monitor
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power
Indicator
Power
Consumption
Normal
operation Active Active Active White 64 W (maximum)**
19 W (typical,
without USB load)
Active-off
mode Inactive Inactive Blanked White
(Glowing ) Less than 0.3 W
Switch off - - - Off Less than 0.3 W
Energy Star Power Consumption
P
on
17.1 W
E
TEC
54 kWh
** Maximum power consumption with max luminance.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
The OSD functions only in the normal operation mode. When any button is pressed
in the Active-off mode, the following message will be displayed:
Dell P2418HZ
No VGA signal from your device. ?
Press any key on the keyboard or move the mouse to wake it up.
the correct input source.
If there is no display, press the monitor button again to select
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR -compliant.
NOTE:
P
on
:
Power consumption of on mode as defined in Energy Star 7.0 version.
E
TEC
:
Total energy consumption in kWh as defined in Energy Star 7.0 version.