Asus ProArt Display PA27UCX-K 27" 16:9 4K HDR IPS Monitor - Manual (Page 29)

3-9 ASUS PA27UCX Series LCD Monitor
7. Input Select
In this function, you can select your desired input source.
ASUS PA27UCX
Standard Mode DisplayPort 3840 x 2160@ 60Hz
Input Select
HDMI-1
HDMI-2
DisplayPort
Type C
8. System Setup
Allows you to adjust the system.
HDR Preview
Adaptive-Sync
Dynamic Dimming
Power Saving
OSD Setup
Language
Calibration Reminder
System Setup
ASUS PA27UCX
Standard Mode DisplayPort 3840 x 2160@ 60Hz
• HDR Preview : Allows you to preview non-HDR content performance with
HDR10 and HLG mapping. While HDR Preview function is on, HDR_PQ
DCI, HDR_PQ Rec2020, and HDR_HLG can be chosen.
• Adaptive-Sync (DisplayPort/HDMI only) : Allows an Adaptive-Sync
supported* graphics source to dynamically adjust display refresh rate
based on typical content frame rates for power efficient, virtually stutter
free and low-latency display update.
* Adaptive-Sync can only be activated within 40Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off Motion Sync, turn
off PIP/PBP mode and set DisplayPort Stream to DisplayPort 1.2.
• Dynamic Dimming : Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as “Fast”, “Medium” or “Gradual”.