Asus ProArt Display PA27UCX-K 27" 16:9 4K HDR IPS Monitor - Manual (Page 23)

3-3 ASUS PA27UCX Series LCD Monitor
* PQ Optimized: Delivers the optimized HDR performance of this
display with as much accuracy as with ST2084 in terms of display
luminance capability.
* PQ Clip: Preserves PQ curve till displaying maximum luminance
with accuracy. ST2084 code value with higher than display
maximum will be mapped to the maximum luminance. We also
provide a maximum of 300 nits for your use.
* PQ Basic: Presents HDR performance of general HDR supported
displays.
• HDR_HLG:
* HLG BT2100: Compliant with BT2100.
• HDR_DolbyVision:
* Bright: Compliant with DolbyVision Bright mode settings.
* Dark: Compliant with DolbyVision Dark mode settings.
• User Mode 1/User Mode 2 : Allows you to make color adjustments in the
Adanced Setting. You can also save one or two ProArt Calibration profiles
as User Mode 1/User Mode 2 after executing ProArt Calibration and then
have quick access here.
Please apply the following settings while performing ProArt color calibration:
• Set output dynamic to full range.
• Set output color format to RGB.
• Set output color depth to 8 bit.
Below tables show the default configurations for each ProArt Preset mode:
Function Standard sRGB Adobe RGB Rec. 709 DCI-P3 Rec. 2020
Color Temp. 6500K
Fixed
(6500K)
Fixed
(6500K)
6500K 6500K
Fixed
(6500K)
Brightness 50
Fixed
(100 nits)
50 100 nits 50 100 nits
Contrast 80
Fixed
(80)
80 80 80 80
Sharpness Enable (0) Enable (0) Enable (0) Enable (0) Enable (0) Enable (0)
Saturation Middle (50) Disable Middle (50) Middle (50) Middle (50) Middle (50)
Hue Middle (50) Disable Middle (50) Middle (50) Middle (50) Middle (50)
Color
Enable
(Default)
Disable
Enable
(Default)
Enable
(Default)
Enable
(Default)
Enable
(Default)
Black Level
Enable
(Default)
Disable
Enable
(Default)
Enable
(Default)
Enable
(Default)
Enable
(Default)
Input Range
Enable
(Auto)
Enable
(Auto)
Enable
(Auto)
Enable
(Auto)
Enable
(Auto)
Enable
(Auto)
Gamma
Enable
(2.2)
Fixed
(2.2)
Fixed
(2.2)
Enable
(2.4)
Fixed
(2.6)
Enable
(2.4)
Uniformity
Compensation
Enable
(Off)
Enable
(Off)
Enable
(Off)
Enable
(Off)
Enable
(Off)
Enable
(Off)
VividPixel Enable (0) Enable (0) Enable (0) Enable (0) Enable (0) Enable (0)