Asus ProArt Display PA27UCX-K 27" 16:9 4K HDR IPS Monitor - Manual (Page 26)

3-6 Chapter 3: OSD (On-Screen Display) menu
• Hue : Shifts the image color between green and purple.
• Color Temp. : Contains 5 modes including 9300K, 6500K, 5500K, 5000K
and P3-Theater.
P3-Theater is only available when DCI-P3 mode is selected.
• Gamma : Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8.
• Black Level : The darkest level of display.
* Signal: To adjust the initialized 1st signal level of darkest gray
level.
* Backlight: To adjust the darkness of backlight.
• Color :
* Six-axis Hue adjustment.
* Six-axis Saturation adjustment.
* Adjusts the gain levels for R, G, B.
* Adjusts the black level offset values for R, G, B.
• Color Reset :
* Current mode color reset:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.
4. Image
Set the image related setting from this menu.
ASUS PA27UCX
Standard Mode DisplayPort 3840 x 2160@ 60Hz
Sharpness
Trace Free
Aspect Control
Uniformity Compensation
VividPixel
Input Range
Motion Sync
Image
• Sharpness : The adjusting range is from 0 to 100.
• Trace Free : Adjusts the response time of the monitor.
To activate this function, you need to do the following: turn off PIP/PBP and
disable HDR on your device.
• Aspect Control : Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.