beautypg.com

Troubleshoot – AOC AG276QZD 27" QHD 1440p 240 Hz Gaming Monitor User Manual

Page 33

background image

31

Troubleshoot

Problems

Possible solutions

The power indicator is not lit.

Check if the power is turned on.
Check if the power cord is connected.

The power indicator is lit, but

there is no image display.

Check if the computer power is turned on.
Check if the graphics card of the computer is well plugged.
Check that the signal wire of the display has been correctly connected to the

computer.

Check the plug of the signal wire of the display, and make sure all pins are not

bent.

Observe the indicator through the Caps Lock key on the keypad of the computer

to confirm if the computer is working.

There is no image, but the

power indicator flashes orange.

The OLED panel malfunctions and fails to work properly. Seek advice from AOC

after-sales service persons.

Failure to realize plug-to-use.

Check if it supports plug-to-use.
Check if the adapter supports plug-to-use.

Dim image.

Adjust luminance and contrast ratio.

The image is bouncing or

rippled.

There may be electrical appliances and devices at the periphery that may cause

electronic interference.

The screen displays “the signal

wire is not available” or “no

signal.”

Check if the signal wire is correctly connected.
Check if the pin of the signal wire plug is damaged.
The OFF-RS function can be enabled and run in the display menu to eliminate

image retention which has been generated. Running this function for several times

can obtain a desirable image display effect. For other instructions regarding screen

maintenance, refer to the User Instructions in the official website.

The screen displays “invalid

input”.

Check if your computer is set in an improper display mode Please re-set your

computer in the display mode listed in the detailed user instructions.

Image retention.

Based on the characteristics of the OLED panel, the OFF-RS function can

be enabled and run in the display menu to eliminate image retention which has

been generated. It is recommended to run this function for several times to

obtain a desirable image display effect. For other instructions regarding screen

maintenance, please refer to the User Instructions in the official website.

Regulation & Service

Please refer to Regulation & Service Information which is in the CD manual

or www.aoc.com (to find the model you purchase in your country and to find

Regulation & Service Information in Support page.