Pip setting – AOC AG276QZD 27" QHD 1440p 240 Hz Gaming Monitor User Manual
Page 25
23
PIP Setting
PIP Setting
Off / PIP / PBP
Disable or Enable PIP or
PBP.
Main Source
Select main screen source.
Sub Source
Select sub screen source.
Size
Small / Middle / Large
Select screen size.
Position
Right-up
Set the screen location.
Right-down
Left-up
Left-down
Audio
On: PIP Audio
Disable or Enable Audio
Setup.
Off: Main Audio
Swap
On: Swap
Swap the screen source.
Off: non action
Note:
1
)
When “HDR” under “Brightness” is set to non-off state, all items under “PIP Setting” cannot be adjusted.
2) When PIP/PBP is enabled, some color-related adjustments in the OSD menu are valid only for the main screen, while
the sub-screen is not supported. Hence, the main screen and the sub-screen may have different colors.
3) Set the input signal resolution to 1280X1440@60Hz at PBP to achieve the desired display effect.
4) When PBP/PIP is enabled, the compatibility of the main screen/sub-screen input source is shown in the following
table:
PBP/PIP
Main source
HDMI1
HDMI2
DP1
DP2
Sub source
HDMI1
V
V
V
V
HDMI2
V
V
V
V
DP1
V
V
V
V
DP2
V
V
V
V