AOC AG276QZD 27" QHD 1440p 240 Hz Gaming Monitor - Manual (Page 29)

27
Extra
Exit Enter Select
Extra
Auto Input Select
Image Ratio
DDC/CI
Wide
Yes
Resolution:2560(H)x1440(V) SDR
H.Frequency:89 KHz
V.Frequency:60 Hz
Off Timer 0
USB Off
LEA On
Orbit Weak
OFF-RS Off
Input Select
Auto/ HDMI1 / HDMI2 / DP1
/ DP2
Select Input Signal Source
USB On/ Off Enable/disable the USB function.
LEA
(Prevention
of local image
retention)
On/ Off
It is used to turn on the LEA function to reduce the
risk of generating image retention. Recommended
function settings: “On.”
After this function is enabled, the screen will be
automatically narrowed to fix the brightness of
the display area, so as to reduce possible image
retention.
Orbit
(Image shift)
Off / Weak /
Medium /Strong / Strongest
It is used to turn the Orbit function on to reduce the
risk of generating image retention. Recommended
function setting: “On.”
After this function is enabled, image pixels will
circularly move as a whole. The movement
amplitude is based on the settings. The moved
character may be side cut. When “Strongest”
is selected, image retention is most unlikely
generated, but possible side cut may be most
notable.
Off-RS
(Elimination
of image
retention)
On/ Off
It is used to enable and run the OFF-RS function
to eliminate image retention which has been
generated.
After startup, select “Yes” according to menu
prompts, and then the display will automatically
shut down the screen. Keep power on, and do not
operate any keys. The power indicator will flash
white (white a second/off a second). This process
lasts for about 10 min. The power indicator turns off
at the end, and the display enters standby state.