Acer PE320QK bmiipruzx 31.5" 16:9 Color Accurate HDR 4K UHD Monitor - Manual (Page 26)

PE320QK User Guide English 15
Hot key3 (Selecting the input)
Open the Input control and select DP,HDMI1(2.0), HDMI2(2.0) or Auto Source. When
you are done, press the joystick to exit current page and store.
Input
Enter Move Exit
HDMI1(2.0) Input
On Auto Source
Main Menu
Press the MENU key to open the OSD.
Toggle the joystick to the up or down to select Picture from the OSD.Then
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
Toggle the joystick to the left or right to adjust the sliding scales.
Information Hot Key
:
Show Monitor Information and Reset control function.
Modes Hot Key
:
To change Modes Hot Key menu.
Exit Hot Key
X
to exit current page and store.
Picture
Mode - Standard
80
50
Off
Off
Off
Color
Audio
Gaming
OSD
System
Brightness
Contrast
Blue Light
ACM
HDR
Off Super Sharpness
Picture
Enter Move
5 Black Boost
X
• Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
• Contrast: Adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
• Black Boost: Adjust the Black Boost from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
• Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- Off, 80%, 70%, 60%, or 50%.
Note: Higher values allow more blue light through. For the best protection select a lower
value.
When “Blue Light” is on, Brightness & Contrast will show each level of “Blue Light”
value.
• ACM: Turn ACM on or off.
Note: Set to “On”, will be based on the current screen to dynamic contrast adjustment.
• HDR: Can control On, Off and Auto, set to Auto will automatically detect and deal with
HDR signal.
Auto: Auto checked source status.
On: Support HDR effect.
Off: No support HDR effect.