Erica Synths Pico Sequencer Eurorack Module (3 HP) - Manual (Page 3)

MODE CONTROLLS ACTION INDICATOR
Set
pattern
length
Push the STEP encoder until it
lights green, and turn it to select
number of steps in the sequence.
Push to confirm. First 8 steps
are indicated with numbers from
1-8, steps 9-16 are indicated with
numbers 1. – 8. with dots.
First 8 steps
Steps 9-16
Select
scales
Push the STEP encoder until it
lights yellow, and turn it to
select one of 10 scales.
Push to confirm.
Scales available:
1 – CHROMATIC, 2 – IONIAN, 3 – DORIAN,
4 – MAJOR PENTA, 5 – MINOR PENTA,
6 – SHARP NOTES, 7 – WHOLE TONE,
8 – MIXOLYDIAN, 9 – MAJOR BLUES,
10 – MINOR BLUES
Number of scale
SET PLAY
MODE
Push the STEP encoder until it
lights red and rotate it to select
play mode. Five play modes
are available:
Forward, Reverse, Ping Pong,
Ping Pong with repeat of last
steps and Random. Rotating
segment in the
indicator will illustrate
currently active play mode.
PLAY MODE
NUMBER
PLAY DIRECTION
Set octave
range
PUSH THE STREP ENCODER UNTIL IT
FLASHES YELLOW, AND ROTATE IT to
set the octave range of sequences,
or, in other words, the range of
the VALUE encoder in Note enter
mode. The sequencer has 1 to 8
octaves range, and indicator
shows the selected range.
Classical acid baslines from
TB-303 had range of 3 octaves.
OCTAVE RANGE SETTING ALSO APPLIES
TO RANDOMISATION.
3 OCTAVES RANGE
CLK IN
GATE
STEP
VALUE
CV
PICO
SEQ
L/S RND
CLK IN
GATE
STEP
VALUE
CV
PICO
SEQ
L/S RND
CLK IN
GATE
STEP
VALUE
CV
PICO
SEQ
L/S RND
CLK IN
GATE
STEP
VALUE
CV
PICO
SEQ
L/S RND