Erica Synths EDU DIY Mixer Eurorack Module Kit - Manual (Page 3)

BILL OF MATERIALS
Before we start, please check if your kit contains all of the necessary components. In
addition to a PCB, panel and power cable, your box should also contain:
A bunch of resistors . The specific values (in ohms,
which you should check for with a multimeter) are
100k x8
27k x1
1k x3
10 Ω x2
A few capacitors . The specific values (which are
printed onto their bodies) are
47 µF (electrolytic) x2
100 nF (104/ceramic) x6
Some diodes . The specific model names (which are
printed onto their bodies) are
SB140 (schottky) x2 2
1N4148 (signal) x2
Please note that these could also be a di ff erent model (e.g. 1N5818). 2
3