Erica Synths PERKONS HD-01 Drum Machine Synthesizer - Manual (Page 7)

In the master output section you
will find a line-level master output,
phones output (the level is tied to
the master level), a master send
output and a master return input
An SD card allows for kit
and pattern saving, as well
as firmware updates
Connect the external power supply here!
Use only the PSU supplied with the unit,
otherwise you may risk permanent
damage to your PĒRKONS HD-01
Full-size DIN5 MIDI In receives trigger note messages,
MIDI clock as well as CC messages for all voice parameters.
Please refer to the MIDI implementation chart in the manual.
The MIDI OUT port outputs trigger and MIDI clock messages
Each voice has a dedicated trigger input, line level audio output and FX
send and return jack sockets, so you can use different FX units or FX
pedals on each voice. FX sends and returns are normalled to the built-in
bucket-brigade delay emulation, so if nothing is connected to relevant
sockets, the built in BBD becomes the default effect for the voices. Trigger
inputs accept triggers from drum sequencers or electronic drum pads
Clock In/Out connectors
are for analogue sync
with external gear.
The PPQ is configurable
in the CONFIG settings
Flip the switch to turn
the PĒRKONS HD-01 on
CONNECTIONS
7