Erica Synths PERKONS HD-01 Drum Machine Synthesizer - Manual (Page 26)

PATTERN AND KIT SAVING AND RECALLING
To LOAD the kit, initiate the KIT menu, press the step
button for a kit you wish to recall – the kit will be
instantly loaded and the sequencer will advance to the
pattern design mode.
KIT LOADING
VCF DRIVE
3/2 4/3
MOD LVL
MULTIPLY GROOVE PLAY MODE DIVIDE
MODULATION DESTINATION MODULATION DEPTH
10% 20% 30% 40% 50% 60% 70% 80%
A B C RND FWD BWD PP RND
PROB RATCHET ODDS1 ODDS2
SYNC KIT PATTERN MOD
VCF DRIVE
3/2 4/3
MOD LVL
MULTIPLY GROOVE PLAY MODE DIVIDE
MODULATION DESTINATION MODULATION DEPTH
10% 20% 30% 40% 50% 60% 70% 80%
A B C RND FWD BWD PP RND
PROB RATCHET ODDS1 ODDS2
SYNC KIT PATTERN MOD
To clear kits, press and hold the CLEAR button and press
on the step buttons – the LED’s will turn off, indicating
the slots have been cleared. To exit the kit menu, press
the KIT button again.
KIT CLEARING
While performing, you may want to exit from any
selected kit and to play with the parameters as they are
configured via the knobs - to do this, hold CLEAR and
press KIT - the PĒRKONS will instantly remove any kit
parameter locks and you will gain full manual control
over all voice parameters.
MANUAL OVERRIDE
26