beautypg.com

Erica Synths DIY Eurorack Case and Power Supply Kit for EDU Modular System (84 HP) User Manual

Page 6

background image

6

Next step – prepare a DC socket. For a

better solder joint, use a file to clean the

chromium coating from the socket lugs

and increase the temperature setting on

your soldering iron to 400

o

C. Solder two

wires to the lugs as shown in the picture

below:

For safety, use small pieces of heat

shrink tubes to insulate solder joints

and heat them with a lighter to make them

shrink around the lugs: