beautypg.com

Erica Synths DIY Eurorack Case and Power Supply Kit for EDU Modular System (84 HP) User Manual

Page 5

background image

The PSU assembly is straight-forward – just solder all of the components on the PCB

according to the silkscreen. Mind the orientation of capacitors (a notch on the

silkscreen must match the negative lead of a capacitor), LEDs and PSU sockets. Once

completed, your PCB should look like this:

Now, turn the PCB around and check the quality of your soldering. Make sure there are

no accidental shorts and that all solder joints are nice and clean.

5