Wi-fi direct mode setup – Epson Workforce Pro WF-7310 Wireless Printer User Manual

Page 39

• If the app does not automatically recognize the product, select the

icon and continue with the

next step.

On the next screen, select

Start setting up

and follow the on-screen instructions.

Note:

If your product is not listed, move closer to the product and try again. If the product is still not

shown, connect your printer to the wireless network using the control panel and then select

Connect

Smartphone to Product Already Connected to Wi-Fi

in the Epson Smart Panel app and follow the

on-screen instructions. See the link below for wireless setup instructions.

Your product is now connected to a wireless network and set up for use with the Epson Smart Panel
app.

Parent topic:

Wi-Fi Infrastructure Mode Setup

Wi-Fi Direct Mode Setup

You can set up your product to communicate directly with your computer or another device without
requiring a wireless router or access point. In Wi-Fi Direct Mode, the product itself acts as a network
access point for up to 8 devices.

Epson product

Computer with a wireless interface