Incorrect colors – Epson Workforce Pro WF-7310 Wireless Printer User Manual

Page 185

185

• If you enlarged the image size in an image-editing program, you need to increase the image resolution

setting to retain a high image quality. Increase the image resolution by the same amount you increase
the image size. For example, if the image resolution is 300 dpi (dots per inch) and you will double the
image size for printing, change the resolution setting to 600 dpi.

Note:

Higher resolution settings result in larger file sizes, which take longer to process and print.

Consider the limitations of your computer system when selecting a resolution, and select the lowest
possible resolution that produces acceptable quality to keep file sizes manageable.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check
Print Head Cleaning

Related topics

Loading Paper

Incorrect Colors

If your printouts have incorrect colors, try these solutions:

• Make sure the paper type setting matches the paper you loaded.

• Make sure the

Black/Grayscale

Grayscale

setting is not selected in your printer software.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

• The ink cartridges may be old or low on ink, and you may need to replace them.

• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors

may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.