Cleaning the paper guide – Epson Workforce Pro WF-7310 Wireless Printer User Manual
Page 148
148
• Select the number representing the pattern with the least amount of separation or overlap.
12. Continue following the on-screen instructions to finish the print quality adjustment.
Parent topic:
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1.
If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this
size: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
2.
Press the
home button, if necessary.
3.
Use the arrow buttons to select
Settings
and press the
OK
button.
4.
Press the down arrow button, select
Maintenance
and press the
OK
button.
5.
Press the down arrow button, select
Paper Guide Cleaning
and press the
OK
button.
6.
Select the paper source you want to clean, if necessary.
7.
Follow the on-screen instructions to clean the paper guide.
8.
Repeat these steps as necessary until the paper comes out clean. If you are using a cleaning sheet,
repeat these steps up to 3 times.
Parent topic: