Epson Moverio BT-35E Smart Glasses - Manual (Page 22)

22
01_Chapter title
01_Head A
02__lead
Using the Belt Clip/Cable Retainer
You can attach the interface unit to the belt by using a
belt clip or cable retainer.
You can also secure extra cables to the cable retainer by
using a commercially available band.
A Attach the belt clip to the interface unit using the
screw supplied.
By changing the direction of the belt clip you can rotate the
interface unit by 90 degrees.
Loosen the screw to lift and rotate the clip. Attempting
to rotate the clip without loosening the screw will dam-
age the clip and interface unit.
B Connect the cables.
C Attach the clip to a belt and so on.