Epson Moverio BT-35E Smart Glasses - Manual (Page 18)

18
01_Chapter title
01_Head A
02__lead
18
Extended Features
Switching between 2D and 3D display
This product uses the side-by-side 3D display format.
To switch between 2D and 3D mode, hold down the
[
] and the [ ] keys at the same time.
The following is shown on the display when switching
modes.
Adjusting the screen brightness automatically
This product can automatically adjust the brightness of
the screen according to the brightness of the environ-
ment in which it is being used.
To turn auto brightness adjustment on or off, hold down
the [
] and the [ ] keys at the same time.
The following is shown on the display when switching
modes.
You can access extended features by holding down two buttons at the same time.
You can check the status of the extended features in the display or by using the LED indicators.