SPYPOINT Force-20 Trail Camera (Brown) - Manual (Page 5)

LEDS
Night lighting to obtain black-and-white photos.
TEST LIGHT
When the button is in the SETUP position and you’re done adjusting your settings, the
red light at the front of the camera will flash to confirm a motion detection. When moved
to the ON position, the red light will flash for 30 seconds, allowing you to move out of the
camera's field of view.
PHOTO LENS
Captures the image.
DETECTION LENS
Expands the detection area of the camera’s motion sensor.
CONFIGURATION SCREEN
Allows the user to access the camera's settings menu.
CABLE LOCK HOLE
Allows the user to install a CLM-6FT cable lock, sold separately.
NAVIGATION BUTTONS
Buttons to navigate the camera’s menus and set the camera.
SLOT FOR INSTALLATION STRAP
Allows the user to install the camera using the included installation strap.
ON / OFF / SETUP SWITCH
Allows the user to turn the camera on and off, as well as access the configuration menu.
OK BUTTON
Allows the user to confirm a selection.
LOCKABLE DOOR LATCH
Allows to lock and open the camera door to access the navigation buttons.
SD CARD SLOT
Narrow opening to insert the required SD card for recording photos/videos.
DOOR
Provides access to the battery compartment, ON/SETUP/OFF button, navigation buttons,
configuration screen and SD card slot.
BATTERY COMPARTMENT
AA battery compartment
TRIPOD MOUNT
Standard ¼''-20 tripod mount.
12 V JACK
The camera can be powered by an external power source such as a 12V battery.
components / 3