SPL Hermes Mastering Router with Dual Parallel Mixes (Red) - Manual (Page 18)

16
Control Elements
11 Display for the position of the Parallel Mix
In this display, the assignment of the Parallel Mix stages is shown.
12 Parallel Mix 1 On / Off
With this button, you can turn the Parallel Mix 1 on or off.
13 Parallel Mix2 On / Off
With this button, you can turn the Parallel Mix 2 on or off.
14 Parallel Mix 1 Gain Control
With this detended potentiometer, you can increase or attenuate the level of Parallel Mix
1 up to 10 dB..
15 Parallel Mix 2 Gain Control
With this detended potentiometer, you can increase or attenuate the level of Parallel Mix
2 up to 10 dB.
16 Parallel Mix 1 Gain Control On / Off
With this button, you can activate or deactivate the Parallel Mix Gain Control 1 (14) .
17 Parallel Mix 2 Gain Control On /Off
With this button, you can activate or deactivate the Parallel Mix Gain Control 2 (15) .
18 Parallel Mix 1 Blend Control
With this detended potentiometer, you can blend between the device connected to an
insert (Wet) and the signal which is located at the input of this insert stage (Dry). This gives
you the opportunity (for example) to use a compressor more intensively, but only mix this
signal with the original signal and thereby maintain a part of the original transients.
19 Parallel Mix 2 Blend Control
The Parallel Mix 2 Blend Control operates equivalent to the Parallel Mix 1 Blend Control,
but for the Parallel Mix 2.
Two Parallel Mix stages are ideal, because this way you can switch between various cons-
tellations (different devices) and mixing ratios (one device with different Dry/Wet ratios).