Overheating protection circuit, I f r – SPL Performer m1000 Mono Power Amplifier (Red) User Manual
Page 15
15
Overheating protection circuit
The Performer m1000 is actively cooled with six temperature controlled fans. The noise of the fans does not
exceed 19 dB – therefore the fans are inaudable.
In the unlikely event of overheating the Performer m1000 will switch off at about 70° C at the heat sink and the
on the front indicates the overheating.
After the temperature has fallen below 55° C, the amplifier automatically switches on again.
I F R