Emerson Radio RP6250 - Manual (Page 10)

9
Radio Operation
1.) Move the POWER ON/OFF selector switch to the “ON” position to turn the
radio ‘On’.
2.) Move the BAND Selector switch to select the desired band:
AM, FM/TV1 or TV2.
• Select AM to tune AM radio stations.
• Select FM/TV1 to tune FM radio stations and TV channels 2 through 6.
• Select TV2 to tune TV channels 7 through 13.
3.) Tune the desired station by rotating the TUNING control.
4.) Adjust the VOLUME control as desired.
5.) To turn the unit ‘Off’, move the POWER ON/OFF selector switch to the “OFF”
position.
Weather Band Operation
This radio receives continuous U.S. Government Weather Broadcasts from the
National Oceanic and Atmospheric Administration (NOAA), part of the Department
of Commerce.
This National Weather Radio service includes more than 750 transmitters covering
all 50 states and adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands, and
the U.S. Pacific Territories. The weather broadcasts are transmitted on seven
separate bands from 162.400 MHz to 162.550 MHz.
To hear the weather reports, press the WEATHER button on the top cabinet at any
time. If you were listening to another band the radio will automatically switch to the
weather band.
The volume level is fixed at optimum listening level on Instant Weather operation.
In order to increase or decrease the volume level, turn the volume control up or
down.
OPERATING INSTRUCTIONS
RP6250_011807.p65 18/1/2007, 10:58 9