Sony SRG-120DU USB 3.0 Full HD PTZ Camera - Manual (Page 17)

17
Attaching Accessories
This section describes how to attach the supplied
accessories to each device.
Attaching accessories to the
body-pack transmitter (UTX-B40)
Connecting the microphone
Be sure to attach or remove the microphone after turning
off the transmitter.
Attaching the holder clip to the
microphone
To secure the microphone cable
Attaching the wind screen to the
microphone
Attaching a belt clip
To remove a belt clip
Note
Tighten the threaded sleeve for a secure connection.
Microphone (supplied)
Push the end of the microphone
holder to expand the ring opening
(
1 ), and insert the microphone
( 2 ). Align the groove on the base
of the microphone with the ring,
then release the clip to secure the
microphone.
Insert the microphone cable through
the clamp of the holder clip.
Align and insert the microphone
into the hole in the wind screen.
Insert one end of the belt clip
into one of two holes on either
side of the transmitter, and then
insert the other end into the
hole on the other side.
Insert a pointed object, such as a
ball-point pen, between the belt
clip and the transmitter, and pry
the end of the belt clip from the
hole on the side of the transmitter.