beautypg.com

Plug-on transmitter (utx-p40) – Sony SRG-120DU USB 3.0 Full HD PTZ Camera User Manual

Page 11

background image

11

Plug-on transmitter (UTX-P40)

a

Audio input connector (XLR type)

Connect to a microphone or the line output of an audio
mixer or other device.

b

+48V (+48 V supply) indicator

Lights up when the unit is set to MIC input and is
supplying power to the connected microphone.

c

POWER indicator

Displays the battery level.

d

AUDIO (audio input level) indicator

Turns on or off according to the audio input level as
follows.

On (red):

Audio input level is too high. If the sound is

distorted, adjust the attenuation level to decrease the
audio input level

(page 28)

.

On (green):

Audio input level is appropriate.

Off:

There is no audio input or the input level is too low.

Flashing (orange):

Audio is muted (i.e., disabled).

e

Display section

A

RF transmission indicator

Displays the current transmission status.

B

RF transmission power indicator

Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.

For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 29).

C

Audio input level meter

Displays the audio input level.

D

Peak indicator

Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.

E

Input level indicator

Displays the input level status.

:

Microphone input

:

Line input

F

Muting status indicator

Displays an icon when the muting function is on.

For details about the muting function, see “Setting the
operation of the audio muting function (MUTE
SETTING) (UTX-B40/P40 only)” (page 29)
.

G

Battery level indicator

Displays the battery level. “USB” is displayed when
power is supplied from the USB connector.

For details, see “Battery level indicator” (page 16).

H

Menu display section

Displays various functions. Press the + or – button to
switch functions.

For details, see “Configuration menu” (page 23).

Indicator display

Status

On (green)

Sufficient battery level

Flashing (green)

Battery is getting low

Off

Supply OFF

Front

Bottom

:

Transmitting

:

Transmission stopped

This manual is related to the following products: