Sony FA-WRC1M Wireless Radio Commander - Manual (Page 21)

Inspection and Maintenance / Notes on Device Connections 21
Inspection before shooting
Inspect the unit before shooting to make sure that
the system is operating normally.
Cleaning
Wipe off dirt on the exterior and any metallic
powder created by attachment/removal using a
soft, dry cloth. In extreme cases, use a cloth
moistened in a little neutral detergent, then wipe
dry.
Do not use organic solvents, such as alcohol or
thinners, as these may cause discoloration or
other damage to the finish of the unit.
Do not clean the unit with an air blower. Dust and
other particles suspended in the air may enter the
unit and cause a malfunction. Also, refrain from
cleaning with high air pressure equipment, such
as an air duster, as these may damage optical
components.
• A Sony audio wireless receiver cannot be used
for connecting the CBK-3610XS.
• For E mount lenses, refer to the recommended
lenses described in the MPC-3610 Operating
Instructions. However, this is not a guarantee of
operation with the recommended lenses.
Inspection and
Maintenance Notes on Device
Connections