Sony FA-WRC1M Wireless Radio Commander - Manual (Page 20)

Attaching to the Camera 20
Attaching the extension cable
Attach the imager block adapter receiver to the extension cable repeater ( 1 ), and attach the extension
cable receiver to the camera body adapter ( 2 ) (tightening torque of 1.4 N·m).
Note
When attaching the receiver, align the index marks on the top and sides of the receiver.
Removing from Camera
1
Remove the receiver from the camera
body adapter.
2
Remove the camera body adapter from
the camera body.
3
Remove the imager block from the
imager block adapter.
Note
Orient the lens side face down when placing the
removed imager block on a flat surface. If the heat
sink side is placed face down, the flangeback
(flange focal distance) may be adversely affected.
4
Attach the imager block, removed in
step
3 , to the camera body (tightening
torque of 1.4 N·m).