Sony a6400 Mirrorless Camera with 16-50mm Lens User Manual

Page 9

C:\Users\User\Desktop\FL\SY22_FL_UCM_RG_111\01GB\5039051111_US.fm

master page: Right

XR-48A90K / 42A90K

5-039-051-

(1)

For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.

• Follow the instruction guide provided

with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.

• The screws for installing the Wall-Mount

Bracket to the TV are not supplied.

• The length of the screw for Wall-Mount

Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.

• Refer to the following table for

wall-mount hole pattern.

• Be sure to store the unused screws and

Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.

Note

• Read the supplied safety documentation for

additional safety information.

• For more detailed information, visit Sony

Customer Support website.*

* Only for limited region/country/model.

Remove the terminal covers.

Remove the screws from the rear of
the TV.

Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).

Note

• If using an electric screwdriver, set the

torque at approximately 1.5 N·m {15 kgf·cm}.

Model Name

Wall-mount hole

pattern

XR-48A90K

300 × 300 mm

XR-42A90K

200 × 200 mm

9 mm – 13 mm

Screw (M6)

Wall-Mount Bracket

TV’s rear cover

Wall-Mount Bracket (not supplied)

Screw (not supplied)