Samson D210A 2-Way Active Loudspeaker - Manual (Page 10)

Auro D208/D210 10
Using a Stereo Line Level Signal
• Be sure that the Auro D208/D210 Power switch is set to the off position.
• Turn the LEVEL control fully counterclockwise to the off position.
• Connect the power cable to an AC socket.
• Using standard XLR or 1/4” cables, connect the line level signals from a mixer or keyboard into the
Auro Inputs.
• Switch the Power switch to the ON position.
• Now, run an audio signal from your mixer (like music from a CD) while slowly raising the Auro’s
Level control until you have reached the desired level.
Connecting a Stereo Signal Source