Samsung AU8000 55" UHD 4K HDR Hospitality TV User Manual
Page 30
Hotel Option menu Item
Description
System
Self Diagnosis
for TV
Run the
Device Care
menu.
•
Start Picture Test
: Use this test when you experience a problem with your TV's
picture.
•
Start Sound Test
: Use this test when you experience a problem with your TV's
sound.
•
Signal Information
: Show digital broadcasting signal information.
•
Reset Smart Hub
: Reset the
Smart Hub
and Samsung account settings stored on
your TV.
•
Reset
: Restore all TV settings, excluding network settings, to the factory defaults.
(Not available)
System Manager
Gives you direct, immediate access to
System Manager
functions such as
Time
,
Language
,
Change PIN
.
System Manager
allow you to adjust your TV's system and customize settings for your
viewing environment.
OTN Update
Lets you upgrade the TV Software over the network when a valid upgrade file is
present on server.
•
OTN Update
changed to
ON
and disabled when
Enrollment Status
in
LYNK Cloud
is
Yes
.
SW Update
Lets you upgrade the TV Software with a USB device.
About This TV
Display the Samsung web site, and product and software information.
Standby LED
When the TV is in standby mode, you can configure the settings of the power
indicator.
•
ON
: The LED is on.
•
OFF
: The LED is off.
TV Reset
Returns all settings on the TV to their factory defaults.
LYNK
Cloud
Enrollment
Lets you enroll the TV with
LYNK Cloud
solution.
Enrollment Status
Check the status of the TV enrollment in the
LYNK Cloud
service.
*Virtual
Standby
Virtual Standby Mode
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
•
Electricity consumption may vary depending on the environment.
Reboot Time
After the TV power is off (in
Virtual Standby Mode
) if there is no input from the user
within the set
Reboot Time
, the TV will reboot and enter
Virtual Standby Mode
again.
Room Number
You can set the room number of the TV's location.
H.Browser
Solution
H.Browser Mode
You can turn on or off the
H.Browser Mode
and run the
H.Browser Web App
.
H.Browser Vendor
You can select the
H.Browser Vendor
.
URL Launcher Setting
H.Browser Solution
settings menu
•
Install Web App
: Enter the
H.Browser server URL where Web App and
sssp_config.
xml files are located.
•
Uninstall
: You can delete the installed Web App.
•
Timeout setting
: Set the timeout period for connecting to the URL.
•
Developer Mode
: If you used
Tizen Studio (SDK)
for development, you can connect
to the Host PC (which SDK is installed) to use the development tool.
•
*: This function is available when
Enrollment Status
in
LYNK Cloud
is set to ON.
•
Refer to the manual of each solution for details about functions and settings of the solutions such as
LYNK Cloud
.
English - 30