Samsung AU8000 55" UHD 4K HDR Hospitality TV - Manual (Page 15)

Cable or Satellite Control Test
This test will check if your Samsung remote can control your cable or satellite box.
During the test, point your remote at your cable or satellite box.
Please check the cable connections, and make sure your devices are turned on.
Did the channel change?
Channel Up
Channel Down
Yes No
5. Press the CH button on the remote control according to the
instructions on the screen in order to test whether the TV
and the set-box operate correctly when you press the remote
control buttons.
– If the TV and the set-box operate correctly, select Yes . The
setup is completed. Go to step 7.
– If the TV and the set-box do not operate correctly, select
No . Go to step 6.
Search for Model Number
We’re having trouble finding the right device code. Please enter the model number below
to search for your device.
Search model number
Manufacturer : Unkown
SMT-C7140
SMT-C7140
6. Follow the instructions on the screen to search for the model
number of the set-top box connected to the TV. When the
model number is found, repeat step 5 for the operation test.
Setup Complete
Now you can control your connected devices with your Samsung remote.
Done New Setup
7. When you have completed all the settings, select Done in the
following screen:
• This function may not be supported depending on the model or geographical area.
• You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote
control without any additional setup.
• Specific external devices connected to the TV may not support the universal remote feature.
• Do not place any obstacles in front of an external device and TV's logo. It may cause signals from the remote
control to be transmitted improperly.
• The TV memorizes both the external device and its connection port (HDMI 1, HDMI 2, etc.).
English - 15